Al Sahlawi Aluminium Trading · Al Sajja, Sharjah · Est. 2002
Aluminiumsupplied.Finished.
Over 200 aluminium sections, sheets and building hardware held in stock across two Sharjah warehouses, then powder coated, cast or wood finished on the same site for contractors, fabricators and fit-out companies in all Emirates.
Special Plate #1200 MM (30 x 15 x 2 MM)
Special Plate #2150 MM
Special Plate #380 MM
Special Plate #440 MM
Special Plate #5135 MM (20 x 15 x 2 MM)
Special Plate #650 MM
Double Faced Special Plate #140 x 17 x 1.5 MM
Double Faced Special Plate #2150 x 17 x 1.8 MM
Double Faced Special Plate #380 x 17 x 1.5 MM
Sliding Interlock (3)137.5 x 49 x 1.5 MM
Sliding Interlock (4)178 x 49 x 1.5 MM
Curtain Wall90 x 50 x 2 MM
Pressure Plate48.85 x 11.3 x 1.8 MM
Curtain Wall Cover50 x 12 x 1.5 MM
Shutter Top61 x 30 x 1.35 MM
Shutter Bottom71 x 30 x 1.3 MM
Sliding Interlock60 x 33.5 x 1.25 MM
Shutter Lock Side60 x 33.5 x 1.25 MM
U-Connector44.5 x 40 x 3.5 MM
Burclose26 x 26 x 1.4 MM
Overlap Tube100 x 50 + 20 MM, 1.9 MM
Overlap Tube with Groove100 x 50 Overlap 27 MM
Square Overlap Tube50 x 50 + 20 MM
Special Tube L100 x 50 x 2 MM
Special L Tube (2)70 x 50 x 1.80 MM
Kickplate100 x 11 MM
Kickplate 2150 x 15 x 1.4 MM
Kickplate with Groove100 x 11 Groove MM
Kickplate U107 x 11 MM
Handrail with Clip65 x 48 x 1.8 MM
Handrail65 x 40 MM
Main Post with Groove80 x 80 x 2 MM
Handrail Clip47 x 16.4 x 1.2 MM
Balcony U40 x 40 x 3 MM (16 MM)
U-Channel30 x 20 x 2 MM
Oval Louver100 x 25 x 1.5 MM
Flat Louver77.6 x 27.9 MM
U-Base47 x 16.40 x 1.2 MM
U-Cover44.60 x 7.8 x 1.5 MM
T-Section90 x 50 x 2 MM
ArrowStandard
Square Tube15 x 15 x 2 MM
Square Tube with Screw25 x 25 x 1.1 MM
Rectangular Tube20 x 10 x 1.5 MM
Rectangular Tube with Screw30 x 15 x 0.80 MM
Round Pipe16 x 2 MM
Equal Angle15 x 15 x 1.5 MM
Unequal Angle50 x 20 x 1.9 MM
Unequal Angle with Groove50 x 20 x 1.6 MM
Round Bar10 MM
Square Bar9.5 x 9.5 MM
Flat Bar20 x 2 MM
Half Round Bar18 x 15 MMFor contractors & fabricators
All your aluminium needs under one roof
- Delivery across the UAETo your site or workshop in every Emirate.
- Cut to lengthProfiles cut to your sizes before they leave.
- No minimum orderOne length or a full project, same service.
- Powder coatingWith chemical pre-treatment on profiles, in-house.
- CNC & laserCutting and machining on aluminium sheets.
- One quote, one supplierSupply, cutting, finishing and delivery together.
In-house services
Supplied, finished and ready to install
Our Al Sajja factory runs its own finishing lines. Keeping the work in-house keeps lead times short and finishes consistent across a whole project.
Powder
Coating
RAL matched gloss, matt, textured and metallic finishes, oven cured for the Gulf climate.
Explore →
Chemical
Pre-Treatment
Degreasing, etching and conversion coating so every finish bonds to clean metal.
Explore →
Aluminium
Sand Casting
Hinges, brackets, gate ornaments and balustrade parts from our patterns or yours.
Explore →
Wood Finishing
on Aluminium
The look of timber with the life of aluminium. No warping, rot or re-staining.
Explore →Product range
Everything a fabricator needs, from stock
Choose a range to see every section and size from our catalogue, then add the sizes you need to a quote.
How a coated order moves
The powder coating line
- Chemical pre-treatmentDegreased and pre-treated so the coating bonds to clean metal.
- Masking & jiggingThreads and contact faces masked, parts hung for even coverage.
- Electrostatic applicationCharged powder wraps evenly around profiles and edges.
- Oven curingCured to a hard, even finish suited to exterior use.
- Inspection & packingChecked for colour and film, then packed for site.
Our facilities
Two warehouses, both in production
Each location carries a standing inventory of more than 300 items and runs full-time production, so orders are filled from stock without waiting on a single site.
About ASA
A Sharjah factory supplying the trade since 2002
Al Sahlawi Bldg. Metal Const. Ind. Factory LLC has operated from Emirates Industrial City, Al Sajja, since 2002. We manufacture and supply aluminium and building metal construction products to contractors, fabricators and fit-out companies across the United Arab Emirates.
ASA Trading brings the full catalogue online: aluminium profiles, sheets and panels, hinges, closers and locks, gate and roller hardware, screws and fixings, sealants, consumables and foundry materials.
- Stock held at the factoryOver 300 items at each warehouse, supplied to all Emirates.
- One supplier, start to finishBuy the section, then have it cut, machined, coated or wood finished on site.
- Finishes matched across a projectRAL-referenced colours and consistent wood grains across a whole elevation.
- Trade sizes and lengthsStandard 5, 6, 6.6 and 7 metre lengths across the profile range.
- Built for the Gulf climatePre-treated, oven-cured finishes suited to exterior use.
Get in touch
Ask for a quote
Factory location
Al Sahlawi Bldg Metal Const Ind Factory LLC
Emirates Industrial City, Opposite Etisalat Al Sajja
Plot No. 10750, Sharjah, UAE
Post
P.O. Box 80079, Sharjah, United Arab Emirates
Telephone
Tel: 06 538 6817
WhatsApp: +971 50 436 4007
Online
info@sahlawialuminium.com